Différences

Ci-dessous, les différences entre deux révisions de la page.

--- projets:home-assistant:aquaponie:sat-cuve [24/05/2025 23:42 ] – [Objectif] Ignace Bienville
+++ projets:home-assistant:aquaponie:sat-cuve [26/05/2025 15:28 ] (Version actuelle) – Ignace Bienville
@@ Ligne 21: / Ligne 21: @@
 La documentation technique complète est disponible :
- -
+  * en ligne : [[]]
+  * en téléchargement (PDF) : [[https://www.alldatasheet.com/datasheet-pdf/download/948120/STMICROELECTRONICS/VL53L0X.html]]
+Toute cette documentation est diffusée sous [[https://creativecommons.org/licenses/by/4.0/deed.fr|licence Creative Commons CC BY 4.0 Deed]] pour en faciliter la réutilisation.
+===== Code =====
+==== Code basique ====
+<code yaml GYVL53L0XV2simple.yaml>
+esphome:
+  name: citerne
+  friendly_name: Citerne
+esp8266:
+  board: esp01_1m
+# Enable logging
+logger:
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "jKAUk7eaGd1hf4V1y9LIXGxA9nLUavgWrY2jFNmTQQ0="
+ota:
+  - platform: esphome
+    password: "57e167ac1e278fd9f20970f9690f9ede"
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Citerne Fallback Hotspot"
+    password: "s6xKWSkMR6XG"
+captive_portal:
+# Activer le support i²c
+i2c:
+  sda: GPIO4    #D2  # à adapter selon ton câblage
+  scl: GPIO5    #D1
+  scan: true
+# Capteur VL53L0X
+sensor:
+  - platform: vl53l0x
+    name: "Distance Laser"
+    update_interval: 60s
+    long_range: false
+    timeout: 200ms
+</code>
+==== Code avancé ====
+<code yaml GYVL53L0XV2adv.yaml>
+substitutions:
+  devicename: citerne
+  friendly_devicename: Citerne
+esphome:
+  name: ${devicename}
+  friendly_name: ${friendly_devicename}
+esp8266:
+  board: esp01_1m
+# Enable logging
+logger:
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "jKAUk7eaGd1hf4V1y9LIXGxA9nLUavgWrY2jFNmTQQ0="
+ota:
+  - platform: esphome
+    password: "57e167ac1e278fd9f20970f9690f9ede"
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "${devicename} Fallback Hotspot"
+    password: "s6xKWSkMR6XG"
+captive_portal:
+# Activer le support i²c
+i2c:
+  sda: GPIO4    #D2  # à adapter selon ton câblage
+  scl: GPIO5    #D1
+  scan: true
+# Capteur VL53L0X
+sensor:
+  - platform: vl53l0x
+    name: "Distance Laser"
+    update_interval: 60s
+    long_range: false
+    timeout: 200ms
+  - platform: wifi_signal
+    name: "signal WiFi (${devicename})"
+    update_interval: 60s
+  - platform: uptime
+    name: "${devicename} Uptime Sensor"
+    id: ${devicename}_uptime_sensor
+    update_interval: 60s
+    on_raw_value:
+      then:
+        - text_sensor.template.publish:
+            id: ${devicename}_uptime_human
+            state: !lambda |-
+              int seconds = round(id(${devicename}_uptime_sensor).raw_state);
+              int days = seconds / (24 * 3600);
+              seconds = seconds % (24 * 3600);
+              int hours = seconds / 3600;
+              seconds = seconds % 3600;
+              int minutes = seconds /  60;
+              seconds = seconds % 60;
+              return (
+                (days ? String(days) + "j " : "") +
+                (hours ? String(hours) + "h " : "") +
+                (minutes ? String(minutes) + "m " : "") +
+                (String(seconds) + "s")
+              ).c_str();
+text_sensor:
+  - platform: wifi_info
+    ip_address:
+      name: "adresse IP (${devicename})"
+      id: ${devicename}_ip_address
+  - platform: template
+    name: "Uptime (${devicename})"
+    id: ${devicename}_uptime_human
+    icon: mdi:clock-start
+  - platform: version
+    name: "Version d'ESPHome installée"
+    id: ${devicename}_ESPHome_Version
+</code>
+===== Intégration Home Assistant ====