Wiki Le BIK'LAB

Cette page est en lecture seule. Vous pouvez afficher le texte source, mais ne pourrez pas le modifier. Contactez votre administrateur si vous pensez qu'il s'agit d'une erreur.
====== Sat Camera ======

{{ :projets:home-assistant:aquaponie:protoaaa_camera.png?600 |}}


===== Hardware =====

ESP32Cam TimerX : https://docs.m5stack.com/en/unit/timercam_x
===== Code yaml ESPhome =====

<file yaml camera.yaml>
substitutions:
  devicename: camera_bassin
  friendly_devicename: "Camera bassin"
  
esphome:
  name: ${devicename}
  friendly_name: ${friendly_devicename}

esp32:
  board: esp32dev
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "JLdvo5678OTSRNRSTCeiu098765"

ota:
  - platform: esphome
    password: "jldv9876povAUIE567987"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "${friendly_devicename} Fallback Hotspot"
    password: "09876RSTCeiua0987654"

captive_portal:
    
esp32_camera:
  name: TimerX Camera
  external_clock:
    pin: GPIO27
    frequency: 20MHz
  i2c_pins:
    sda: GPIO25
    scl: GPIO23
  data_pins: [GPIO32, GPIO35, GPIO34, GPIO5, GPIO39, GPIO18, GPIO36, GPIO19]
  vsync_pin: GPIO22
  href_pin: GPIO26
  pixel_clock_pin: GPIO21
  #power_down_pin: -1
  resolution: 800x600
  jpeg_quality: 10
  max_framerate: 15 fps
  idle_framerate: 0.1 fps
  vertical_flip: true
  horizontal_mirror: false

button:
  - platform: restart
    name: "Redémarrer TimerX Camera"    

sensor:
  - platform: wifi_signal
    name: "signal WiFi ${friendly_devicename}"
    update_interval: 60s
 
  - platform: uptime
    name: "${friendly_devicename} Uptime"
    id: ${devicename}_uptime_sensor
    update_interval: 60s
    on_raw_value:
      then:
        - text_sensor.template.publish:
            id: ${devicename}_uptime_human
            state: !lambda |-
              int seconds = round(id(${devicename}_uptime_sensor).raw_state);
              int days = seconds / (24 * 3600);
              seconds = seconds % (24 * 3600);
              int hours = seconds / 3600;
              seconds = seconds % 3600;
              int minutes = seconds /  60;
              seconds = seconds % 60;
              return (
                (days ? String(days) + "j " : "") +
                (hours ? String(hours) + "h " : "") +
                (minutes ? String(minutes) + "m " : "") +
                (String(seconds) + "s")
              ).c_str();

text_sensor:
  - platform: wifi_info
    ip_address:
      name: "adresse IP ${friendly_devicename}"
      id: ${devicename}_ip_address

  - platform: template
    name: "Uptime ${devicename}"
    id: ${devicename}_uptime_human
    icon: mdi:clock-start
 
  - platform: version
    name: "Version d'ESPHome installée"
    id: ${devicename}_ESPHome_Version
    


</file>